The existence of central lock on a car is very helpful. This is to facilitate the driver to lock and unlock the door without having to change positions. However, it would be a problem when the central lock suddenly jammed. Usually, it happens because the connecting cable broke. or, can also no longer penguncinya motor function.
If you encounter this condition, you do not need to panic. There are simple ways to outsmart:
1. Open the panel door (door trim) first. Loosen and disconnect the bolts holding the motor central lock. Then remove the motor from the seat and handlebar lock.
2.Periksa cable tespen relationship with, to ascertain whether the current is still flowing to the motor.
3. Connect the motor directly to the battery to check if the motor lock is functioning properly. When you hear a normal, meaning there is no problem. Motor does not work perfectly if there is a motor drive gear worn or broken. To check the motor break the lock with an electric drill.
4. See the state of good driving gear on the motor and the trunk. When the wear has not been severe, stingy gear drive to restore to its original shape.
5. When the gear drive has been severely broken aliases, change gear drive by changing the thickness of the rubber pengganjalan. In order not to touch the rod move teeth worn or broken earlier.
6. After that rakitlah motor back lock and check that it worked perfectly. Attach the motor lock on the door. Set the motor position to complete its motion before tightening the bolt holder.
7. Check the condition of the connecting bar, make sure none are bent and can work well.
8. Do not forget to reattach the door panel in place.
If you encounter this condition, you do not need to panic. There are simple ways to outsmart:
1. Open the panel door (door trim) first. Loosen and disconnect the bolts holding the motor central lock. Then remove the motor from the seat and handlebar lock.
2.Periksa cable tespen relationship with, to ascertain whether the current is still flowing to the motor.
3. Connect the motor directly to the battery to check if the motor lock is functioning properly. When you hear a normal, meaning there is no problem. Motor does not work perfectly if there is a motor drive gear worn or broken. To check the motor break the lock with an electric drill.
4. See the state of good driving gear on the motor and the trunk. When the wear has not been severe, stingy gear drive to restore to its original shape.
5. When the gear drive has been severely broken aliases, change gear drive by changing the thickness of the rubber pengganjalan. In order not to touch the rod move teeth worn or broken earlier.
6. After that rakitlah motor back lock and check that it worked perfectly. Attach the motor lock on the door. Set the motor position to complete its motion before tightening the bolt holder.
7. Check the condition of the connecting bar, make sure none are bent and can work well.
8. Do not forget to reattach the door panel in place.
Anda sedang membaca artikel tentang
Do not Panic When Central Lock Loss
Dengan url
http://motormodiftips.blogspot.com/2011/07/do-not-panic-when-central-lock-loss.html
Anda boleh menyebar luaskannya atau mengcopy paste-nya
Do not Panic When Central Lock Loss
namun jangan lupa untuk meletakkan link
Do not Panic When Central Lock Loss
sebagai sumbernya
0 komentar:
Posting Komentar